• CALL 21-33901608

You Can Choose the Best Mining Machines!

VSI5X Vertical Shaft Impact Crusher

VSI5X Vertical Shaft Impact Crusher

Mining Machines overviews

VSI5X Vertical Shaft Impact Crusher is popular in the market. This machine can satisfy customers’ requirements about efficiency and capacity, because its service life is increased by 48%, the costs are reduced by 30%, and the throughput of materials is improved by 30%.


1. Rotor with deep chamber increases 30% capacity after perfect design. 2. Side plate direction can be changed to increase material utility ratio, operating ratio can be increased 48%. 3. Worn hammer with combined type is only changed to reduce operating cost 30%. Another pair of vice hammer is added to prevent from damaging main hammer and side plate. 4. The most key wear resistant material uses wear resistant and high temperature resistant material in American important area. 5. Rhombus shape impact plate is used to prevent side plate from being damaged. 6. Bearing is famous international brand imported from Japan, Sweden, America, etc. 7. Perfect discharge and smooth curve reduce resisting force when material flows, so capacity is increased greatly.

Working Principle

When entering into impeller, the raw material can be crushed directly by hitting impact plate after it is accelerated and threw out. The raw material can also be divided into two parts by material-dividing plate. One falls down from all around. The other enters into impeller and is accelerated, threw out and collides with the falling material and hit, rebound with impact plate. The circulation hits repeats. As the crushing is moving forward, small particle materials will gradually form a material bed around the impact plate which can improve the crushing effect and protect the machine. The desired artificial sand comes downwards though outlet finally.

Specifications - Technical Data

Model VSI5X7615 VSI5X8522 VSI5X9532 VSI5X1145
Throughput capacity (t/h) Center and Ring feeding 150~280 240~380 350~540 500~640
Center feeding 70~140 120~190 180~280 250~360
Max. Feed Size (mm) Soft material <35 <40 <45 <50
Hard material <30 <35 <40 <45
Rotation speed (r/min) 1700~1900 1500~1700 1300~1510 1100~1310
Power of double motor (KW) 2×75 (100) 2×110 (150) 2×160 (220) 2×220 (300)
Overall dimension L×W×H (mm) 4100×2330×2300 4140×2500×2700 4560×2600×2900 5000×2790×3320
Weight (t) 8.6 11.8 17.5 27.5
Thin oil lubrication station Power for double oil pump 2×0.25(0.33)
Safety TO make sure the supply of the oil with double oil pump; stop working without oil or hydraulic pressure; temperature falls when the water cool;start the motor by heating it in winter
Power for oil box heater 2 KW
Overall dimension L×W×H (mm) 820×520×1270